RACING CAMS, HEADS PORTED AND POLISHED, OR THE BOTTLE( DRY 30 SHOT)? DONT BOTHER MENTIONG A PC3. I THINK THERE A WASTE OF MONEY AND OVERRATED? JUST MY OPINION THOUGH. ANY OTHER IDEAS ARE APPRECIATED? I'M NOT A KNOW IT ALL SO I'M ALWAYS WILLING TO LEARN. THANX FELLAS.

 

take it to a track. If you still need more speed get a pilots license.

And to do any of that you will need a PCIII or similar n a custom tune n map.

 

I'VE SEEN A FEW BIKES WITH HEADS PORTED AND POLISHED WITHOUT A PC3. JUST TURNED THE GAS FLOWUP A BIT THROUGH THE ECU SYSTEM. ONE OF THEM IS A 06 GSXR 1000 AND RUNS BETWEEN A 9.1 AND 9.3 IN 1/4 MILE. AT LEAST WHEN I WAS WATCHING. THANX FOR THE REPLY THOUGH. GUESS I BETTER GET MY PILOTS LICENSE CAUSE I'VE TOPPED MY BIKE OUT B4. 176MPH WITH THE SMALL MODS I HAVE.

 

I doubt seriously they were running a stock ecu n if they were they were not running at their best.

 

I'M NOT GONNA SIT HERE AND SAY I SEEN THE WORK GET DONE BUT A BUDDY OF MINE DOES THE WORK FOR HIM, AND THATS HOW I KNEW WHAT HE HAD DONE. BURKHEAD PERFORMANCE IF YOUR IN THE RICHMOND, VA. AREA. HE DOES GREAT WORK

 

So you want to go faster then 176, or get there faster, or both? I also assume your wants are just for straight line?

 

a little more top speed would b fine with me, but my main concern is getting there faster. im gonna start drag racing at a trackthisyear, dont want to lose to those damn suzuki's.

 

Oh also do you have a full exhaust or just a can? If just for the track i would do the bottle and more bolt on's. If you really want the everyday power build the motor, but thats gonna cost ya alot of dough.

 

+1 To get the best performance out of all of those mods, you would need to retune. Especially if you're gonna run NOS, you're going to have to figure out some way of richening the mixture.

BTW, the PCIII is how you turn the 'gas flow' up on a fuel injected system...

 

Now granted i dont know bikes as well as cars so i have to ask, cant the stock ecm be flashed, or retuned? I assume dealers can do it, so couldent someone else buy the needed equipment, then you wouldnt need the pc3.