Electrical Harness
 

I own a 2003 honda cbr 954rr and last weekend I had to make modification to the rear lower cowl because the original owner cut up the original mounting point for the fender eliminator which he did not have to. doing this job I had to pull the battery tray which meant I had to remove the entire wiring harness that sits right in front of the battery. when I was done and put all the electrical harness back I tried to start up my bike everything started as it should but when I pressed the start button it started to rev but would not fully start. When it would not fully start I pulled the seat and removed the battery but I was in such a rush that I accidentally touched my wrench to the body of the bike and caused a spark. I dont know if that made a difference or not but I checked all the connectors and everything seemed fine but the bike still will not fully start. I will work on it this weekend again and try to find why it will not fully kick over to start. If anyone has any ideas please let me know... I really want to go riding this weekend.
https://cimg1.ibsrv.net/gimg/cbrforu...0a567d8d26.jpg