removing PAIR system..
 

PC3 required? or reccomended?

RE: removing PAIR system..
 

what is the PAIR system? emissions control?

if so i would think a PCIII would be a good idea, you might have to custom map though, i am not sure if they have maps for download that would take that into account.

RE: removing PAIR system..
 

The PAIR is an acronym for Pulsed Air Induction Reed valve.It injects fresh air from the airbox into the exhaust system to help burn off fuel that was not burned in the pistons. It will cause dyno air sensors to read lean because of the fresh air injected, so it either has to be blocked off orremoved completely to dyno tune the engine. Heybuddy are you going to get a PCIII and a custom map ? Then do this mod....if your not going to get that stuff..I dont see the reason to get the mod done. It removes about a pound of weight....but your not gaining anything performance wise persay. I've seen a couple of arguments that saysit helps performance of the engine marginally by potentially increasing exhaust and intake flow...but thats a pretty tough sell and a lot of work for that "potential" gain.

RE: removing PAIR system..
 

god damn this site

RE: removing PAIR system..
 

HA!

http://i36.photobucket.com/albums/e1...2/Untitled.jpg

RE: removing PAIR system..
 

hey buddy = genius. do it

RE: removing PAIR system..
 

i have a PCIII and i'm about to get a custom map, after i get this done you think is better to remove the pair?

RE: removing PAIR system..
 

thats what im trying to deduce..

if its going to be a custom map anyways... ya know?

RE: removing PAIR system..
 

do the mod heybuddy...you are perfect candidate. God damn this website [:@][:@][:@][:@]I typed out a whole thing GGGRRRRRRR

RE: removing PAIR system..
 

Kyle Racing block off plates : http://www.shop.kyleusa.com/product....;productId=106

RE: removing PAIR system..
 

I want to get a custom map for my bike within the next few weeks, are there directions somewhere on how to remove the PAIR? Is it hard, any suggestions from anyone who's done it?

RE: removing PAIR system..
 

And what is going on with this damn site lately?! I can never get a good post to show up.

RE: removing PAIR system..
 

basic how-to

RE: removing PAIR system..
 

http://www.oppracing.com/images/2786...cbr600-f4-f4i/

RE: removing PAIR system..
 

http://www.600rr.net/vb/showthread.p...t=pair+removal

RE: removing PAIR system..
 

Thanks guys, very useful!

RE: removing PAIR system..
 

Heybuddy, is the 1K the same removal as my 600? Your link was for a 1K. JW

RE: removing PAIR system..
 

Stay, if you need some screen shots for removing the Airbox I could send them your way.

RE: removing PAIR system..
 

so being ppl have removed the PAIR system for aesthetic reasons. my q iiz...if it iiz used 2 burn off the xtra fuel in the pistons and it iiz removed then can it cause any harm?

RE: removing PAIR system..
 

yeah its the same

RE: removing PAIR system..
 

hey buddy. my friends just put together a passed-away friends crashed bike and went thro much pain trying to find a 05/06 cbr without a full system to figure out how to wire the pair right. and you just want to take it off? lol they would sh!t their pants if they knew! jk man but yeah, do it already:)

RE: removing PAIR system..
 

YeahCrash that would be awesome. I was in there when I installed my PCIII and was going to put my K&N in but was pinched for time and gave up quickly. Seems a little more intailed than I imagined itwould to get to the filter. Thanks man I appreciate it. Oh will the bike run rough untill I get a tune or will I be okay?

RE: removing PAIR system..
 

Here is some screen shots for removing the Air Cleaner Housing.

Attachment 70700
Attachment 70701
Attachment 70702
Attachment 70703
Attachment 70704
Attachment 70705
Attachment 70706
Attachment 70707
Attachment 70708

RE: removing PAIR system..
 

Thanks crash. I can't see them here at work but i'll pull them up at home and get to work. I appreciate it. If I do the pair mod will I be okay for a few weeks without a tune or should I hold off?

RE: removing PAIR system..
 

Attachment 70699

RE: removing PAIR system..
 

yeah as you can see from the service manual its def an all day or all weekend project.

maybe this winter when the whole bike is apart for powdercoating..

RE: removing PAIR system..
 

the PAIR has nothing to do with the exhaust.

i think your thinking about the Exhaust valve controller on the mid-pipe

RE: removing PAIR system..
 

eh whateva. so did you do it yet or what

RE: removing PAIR system..
 

not till winter