Did I wreck my clutch?
#1
Guest
Posts: n/a
Did I wreck my clutch?
I am by no means a mechanic. I bought my 2003 600RR used off a great friend of mine 1 1/2 years ago so I can work on it myself and learn to ride.
I was acting up last night and tried to burn out. It work but when I dumped the clutch the last time the tire wouldn't spin.
1. I can sit on the bike with the brake and clutch out and hold it in place with my feet.
2. It feels like it shifts into gears but will not go over 10MPH. No uphill either.
3. I rev it up and nothing happens.
4. I inspected the clutch cable and it works fine.
There are no strange noises. I cant hear any parts pinging around. Everything else sounds fine. WTF did I do?
I was acting up last night and tried to burn out. It work but when I dumped the clutch the last time the tire wouldn't spin.
1. I can sit on the bike with the brake and clutch out and hold it in place with my feet.
2. It feels like it shifts into gears but will not go over 10MPH. No uphill either.
3. I rev it up and nothing happens.
4. I inspected the clutch cable and it works fine.
There are no strange noises. I cant hear any parts pinging around. Everything else sounds fine. WTF did I do?
Last edited by 03600RR1775; 07-31-2010 at 10:36 AM.
#5
You prolly shyt canned the springs etc. pull the clutch assembly apart and see what all is mangled. A reg clutch kit is about $180.
#6
Thread
Thread Starter
Forum
Replies
Last Post