07 CBR600RR Full Akrapovic Evo/PCIII mapping
#1
07 CBR600RR Full Akrapovic Evo/PCIII mapping
Hello everyone I have a 07 600RR just put a full Akrapovic Evo exhaust with BMC airfilter and PCIII was wondering if anyone has this setup? I talked to one of the guys at Dynojet he recommended the Arrow map which runs fine but is there a better map? Anyone get a custom dyno tune and map yet?I know getting itdyno'd and custom tuned is the bestbut for now just want it to be close any info would be appreciated.Thanks
Mick
Mick
#2
RE: 07 CBR600RR Full Akrapovic Evo/PCIII mapping
Nearly Two GRAND in exhaust, intake, and fuel management parts... and you don't want to just go get it custom mapped? I would roll the Arrow map till this weekend, then go get it done. I'm not sure the costs out there you are, but here in Oklahoma (thanks to SchiraF4I's sluething skills), a full dyno tune only costs about $250. That's a drop in the bucket after you've gotten the full titanium Akrapovic exhaust.
Either way, good luck on hunting it down! Take some pictures when that baby starts to "blue" out for me.
Either way, good luck on hunting it down! Take some pictures when that baby starts to "blue" out for me.
#3
#4
RE: 07 CBR600RR Full Akrapovic Evo/PCIII mapping
for every one that was starting to miss them, their back ;P
http://i259.photobucket.com/albums/h...U/PC280145.jpg
http://i259.photobucket.com/albums/h...U/PC280148.jpg
http://i259.photobucket.com/albums/hh303/RounderNU/PC310221.jpg
-fullAkrapovic Evolution exhaust system (titanium) $1,400
-BMC Racing air filter $93
-PowercomanderIII $320
-Custom fuel map(and Dyno)and installation of aftermarket parts by Motion cycle sports of Dallas $500
-integrated blinker and running/brake lights installed into the passenger foot pegs $250
-CRG Shorties (black) $200
-frame slider kit $130
-Stomp Grip $40
-flushmount front blinkers(Hotbodies) $30
had it since about july07[sm=gears.gif] i would get the custom mapping! i did not notice a change other than sound till i did.
http://i259.photobucket.com/albums/h...U/PC280145.jpg
http://i259.photobucket.com/albums/h...U/PC280148.jpg
http://i259.photobucket.com/albums/hh303/RounderNU/PC310221.jpg
-fullAkrapovic Evolution exhaust system (titanium) $1,400
-BMC Racing air filter $93
-PowercomanderIII $320
-Custom fuel map(and Dyno)and installation of aftermarket parts by Motion cycle sports of Dallas $500
-integrated blinker and running/brake lights installed into the passenger foot pegs $250
-CRG Shorties (black) $200
-frame slider kit $130
-Stomp Grip $40
-flushmount front blinkers(Hotbodies) $30
had it since about july07[sm=gears.gif] i would get the custom mapping! i did not notice a change other than sound till i did.
#5
RE: 07 CBR600RR Full Akrapovic Evo/PCIII mapping
Hey guys thanks for the feedback yeah I am very happy with the Arrow map right now but will definetly spend the $300 for a custom map n tune so its correct. Thanks for the pictures here is mine hope it is clean and custom hope it shows up on the post here never put up a picture before....
Mick
Mick
#7
RE: 07 CBR600RR Full Akrapovic Evo/PCIII mapping
Well looks like the attachment is there so here is my setup on the bike.
Akrapovic Evo Titanium full exhaust-
Dynojet PCIII
BMC race filter
CRG levers
Frem Tubo brake lines
Sato Rear sets
Sato Frame sliders
Sato rear spools
Rizoma Fender eliminator kit (After picture)
Watson front blinkers
Stompgrip tank pads
Own custom rear brake resorvoir
Puig race windscreen
Akrapovic Evo Titanium full exhaust-
Dynojet PCIII
BMC race filter
CRG levers
Frem Tubo brake lines
Sato Rear sets
Sato Frame sliders
Sato rear spools
Rizoma Fender eliminator kit (After picture)
Watson front blinkers
Stompgrip tank pads
Own custom rear brake resorvoir
Puig race windscreen
Thread
Thread Starter
Forum
Replies
Last Post