On the picture with the carbon work and the four lights, is there a clear lens over the assemble?


[IMG]local://upfiles/9822/B4B36F678B7940A78A9491B710C349A9.jpg[/IMG]

[IMG]local://upfiles/9822/D3D7984DBD794AFCB27C42AAB02F5504.jpg[/IMG]

 

No, the carbon is exposed. But each of the projection lights is weather safe.

 

Could a clear lens be added for that smooth aerodynamic look? How hard would it be and what would be the cost factor?

 

Huge.

 

so when would these be actually ready to order and receive? I am extremely interested

 

The new lexan assemblies will be ready for order late next week. I accept PayPal and other payents, let me know what works for you. I do not keep a stock of these so your order will probably take a couple weeks to complete. Once I order the parts they are sent to me and I will do the modification and include the custom carbon fasteners. If you are interested in the Ram Air unit aswell it will become availible in late September. Please know a little work will be required on your part to insure a proper fit. I send the units ready to mount to any fairing so you will need to do a little cutting on your fairing for the lights to fit in and also a little sanding on the mounting edge to insure a snug fit. You also will epoxy the carbon assembly mounts to the inside of your race fairing. Not anything hard and I include detailed instructions on how to do these modifications. Required tools: dremel w/ cutting wheel or carbide bit, heat gun- to form mounts to your specific fairing (they are all slightly diffrent from one another so if I do it on one of my race fairings it might not mount perfectly to yours), and a sanding block with coarse paper. I am open to doing this custom work for you but there is a custom work charge for time spent fitting these assemblies and you would need to ship your upper fairing to my shop.

 

these are nice!!! where did you find the headlights for these??

 

the carbon lights are straight custom

 

Armstrong,

Can you take a side view picture of both the lexan and carbon assemblies mounted in the fairing? I have a race fairing ready for these headlights!!

Alex

 

I will post pictures of the new lights installed as soon as I receive a new set of fairings the second week of September. I will have alot of updates at that time. I am still working hard to complete a 100% road ready setup for the carbon assemblies. The new lights are deffinately going be my future product of choice due to thier ease of conversion and installation. The Ram Air assembly will be the main carbon piece I produce along with the gauge mounts and yoke protector. The ram air will hopefully be completed by the end of September.