Over a month ago, I pulled the motor apart in my 1998 F3 as it was kicking out of 2nd gear. I noticed while I had it all apart that it could use new low end bearings as well as the 1-2 shift fork being extremely worn on one side. Now today, about 6 weeks later (due to honda dealer's F#*& up) I have it all back together. So I took it out for a spin and...FAIL! it still kicks out of second every time I shift from first and get on the power, even just slow acceleration, it pops out of second gear!

So I need to know what parts do I need to completely replace second gear, eg. which gears on each of the main and counter shafts do I need to have a completely new second? I need to get these parts by next weekend! (the 25th of august).
Thanks.

-Frankie

 

mine had the same issue, it was worn dogs on the gears, my 1-2 shift fork was worn and blued. required a new fork and gears, i just purchased a set of used gears all assembled from a seller on ebay.

 

Try using this site Honda, ATV Parts, Scooter Parts, Motorcycle Parts,CRF,CR,MX Parts, Goldwing parts

It should show you what Gears are first and 2nd