![]() |
How to- front fender removal?
Hello all,
Started to remove my front fender (has a crack) and after I removed the front two allen wrench bolts I noticed it was being held on in the back of the fender too. Anyone have a link or vid or anything on how to remove the fender properly? It "looked" like the fender is somehow attached near or with the breaks but again I'm not sure. Just don't want to start unscrewing something and then realize it's way more complicated then it looks. I found a vid only about putting a new one on but it totally skipped from sliding it in between the forks to drilling the holes for the same two spots I already see how to work with. Said nothing about how it's held on in the back. I realize its a silly question for those that work on bikes all the time but having owned 3 sport bikes over the years and having had my M licensence for 20 yrs I never once had to do any work at all on any of my bikes so I just plum don't know how to do it and I ain't gonna sugar coat it and pretend I do. Lol. Thanks in advance. |
The fender is held in back by 2 bolts, you can just unscrew those, it doesn't hold the brakes, it holds the cables in closer together and I believe has reflectors...
once you remove the 2 bolts, just move the fender up. |
^ agree once again. damn u kerosene ur always beating me to post. hahaha. and btw im starting my bike in 2 weeks or so. riding season is almost over up here in lovely western NY. :(
|
The fender can be a tight fight and that is probably what you feel is holding it there.
|
iv just stripped my cbr 600 f3 down to frame and engine :D and nothing i have found is complex apart from the front fairing if anybody (like the previous owner of my bike) has rounded off the screws so dont be so scarred and get stuck in next time. im 17 so if i can do it anybody can :D.
|
Originally Posted by jackojeff
(Post 977157)
iv just stripped my cbr 600 f3 down to frame and engine :D and nothing i have found is complex apart from the front fairing if anybody (like the previous owner of my bike) has rounded off the screws so dont be so scarred and get stuck in next time. im 17 so if i can do it anybody can :D.
**Sorry for the thread-jack** |
Originally Posted by kerosene
(Post 976914)
The fender is held in back by 2 bolts, you can just unscrew those, it doesn't hold the brakes, it holds the cables in closer together and I believe has reflectors...
once you remove the 2 bolts, just move the fender up. |
Originally Posted by ThatsMydawg
(Post 977251)
Thanks to everyone! I'm replying to this via my iphone so I'll just thank all of you at once. I'll take the fender off this weekend and if possible post some pics to help someone else in the future. Thanks again from your CBR brother from another mother. Lol
|
| All times are GMT -5. The time now is 02:26 AM. |
© 2026 MH Sub I, LLC dba Internet Brands