Carb Question.....
Thread Starter
|
Junior Member
Joined: Sep 2009
Posts: 16
Likes: 0
From: North Carolina
Carb Question.....
Last summer bike was busting out in higher RPM's decided to break it all down to clean the carbs and change the plugs and so forth. got the carbs back supposable cleaned and put it all back together.... ran really good for a few good minutes and then died... during running i noticed dramatic rpm change and also gas had made it to the top air tubes between carbs 1-2 and the tube between 3-4. Now when i try to start it it dont do anything but flood itself out and backfire. wondering what might have went wrong if anyone can help me...
Last summer bike was busting out in higher RPM's decided to break it all down to clean the carbs and change the plugs and so forth. got the carbs back supposable cleaned and put it all back together.... ran really good for a few good minutes and then died... during running i noticed dramatic rpm change and also gas had made it to the top air tubes between carbs 1-2 and the tube between 3-4. Now when i try to start it it dont do anything but flood itself out and backfire. wondering what might have went wrong if anyone can help me...
were they gap'd the 35-40 they needed to be?
you need to make sure your plugs aren't wet and are firing.
Thread
Thread Starter
Forum
Replies
Last Post
