Those two scoops at the front of a stock F2 fairing look like the perfect place for some rubber tubes...say about...22mm in diameter to snake back and pressurize the airbox. You would then need slightly more fuel with a jet kit...

Anyone done this?

 

like ram air? anythings possible as long as you jet it..

[IMG]local://upfiles/7261/60D1298836D8482A99447012B7BE42EB.jpg[/IMG]

 

Is your bike ram air...you just took the top of the box off and showing off the individual air filters to each carb or....?

It's a thought....might do it....later...

 

i dont have a airbox at all just the indvidual filters.... but i think the ram air thing would be a good idea i thought about it when i first got the bike but never followed through! but now i am intrigued and want to see if it works..

 

Doh....I remember now...my old 1992 FZR 600 had the K&N individual filters. Came that way...bought the bike used. I thought the bike was just made that way at the time...

 

Would you have a problem like the guy who gets too much air when going into the wind? I thought about this too, there are perfect gaps in the frame to route the tubes through.

 

hmmmm, thats an interesting idea. i think i'll check around for some single airfilters...

 

EMGO tapered air filters 54mm part# 12-55754 they were 10.95 each..