CBR 600F2 1991 - 1994 CBR 600F2

not running right

Old Apr 15, 2008 | 07:06 PM
  #1  
Clorox09's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 51
Likes: 0
Default not running right

I have a 91 cbr f2... bike starts up flawlessly only idle with choke applies even warm but any throttle after idle it either back fires or just basically dies.... it has full voltage at battery(stator new and works)... rectifier is new as well (blew them last season just put them in) wires in correct firing order. pulse generator tested good. I have spark at wires...
 
Reply
Old Apr 15, 2008 | 07:54 PM
  #2  
CBR13F2's Avatar
Joined: Sep 2007
Posts: 240
Likes: 0
From:
Default RE: not running right

you NEED to clean your carbs. thats the primary reason it will only run on choke.
 
Reply
Old Apr 16, 2008 | 03:55 PM
  #3  
Clorox09's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 51
Likes: 0
Default RE: not running right

carbs have already been cleaned....
 
Reply
Old Apr 16, 2008 | 04:38 PM
  #4  
elmer's Avatar
Senior Member
Joined: Dec 2006
Posts: 554
Likes: 0
From:
Default RE: not running right

Have you fouled your plugs? Do your carbs have a jet kit in them and are poorly adjusted? To what degree where your carbs cleaned? Were they pulled out, bowls knocked off and every individual jet cleaned and the mixture screws set? Or are we just talking a can of seafoam or some carb cleaner sprayed in there. Are all the vacuum hoses hooked up correctly? Do you have good flow from your petcock on the gas tank with the vacuum line hooked up?

Answer all my questions and I'll probably answer yours
 
Reply
Old Apr 16, 2008 | 05:20 PM
  #5  
woo545's Avatar
Senior Member
Joined: Jun 2007
Posts: 2,680
Likes: 1
From: PA
Default RE: not running right

Don't listen to Elmer.....I have a crystal ball that can give you the answer....


Sunspots




(Elmer looks like he's got you pretty covered though...)
 
Reply
Old Apr 17, 2008 | 06:07 PM
  #6  
Clorox09's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 51
Likes: 0
Default RE: not running right

All The main jets and screws i could take out were all cleaned just brake cleaning thru them... My main jets have always been basically maxed out tight for some reason... how many should i back them out then? Last season was last time all carbs were synced 2gether, all vacuum lines r connected got flow from peacock
 
Reply
Old Apr 17, 2008 | 06:24 PM
  #7  
Clorox09's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 51
Likes: 0
Default RE: not running right

The main jets say 135 on them not sure if thats stock jet or not
 
Reply
Old Apr 18, 2008 | 12:02 PM
  #8  
Clorox09's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 51
Likes: 0
Default RE: not running right

I cant find how many turns out on the main jet if any? Pilot screw was off.... is that enough to cause my issue
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gundamknight07
CBR 900RR
12
Jul 26, 2012 08:24 AM
motogpman
CBR 600F2
5
Aug 28, 2009 07:10 PM
entity-unknown
General Tech
0
Mar 20, 2009 11:55 AM
motoman358
CBR 600F3
8
Jul 2, 2008 08:59 PM
Kym
CBR 1000RR
8
Jun 22, 2008 07:33 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:41 AM.