I need some help here. . .

first off the bike ran great last year with no problems at all. for the winter I put some stabil in and took the battery out. I just now had time to get back to it yesterday, I put the battery in and of course that was dead, so we hook up the jump box to start it. . .

And here is the problem
The cluster is not coming on and the fuses are all fine, there are no wires chewed through by mise or anything and every wire I could see was hooked up just fine . . . .

Please help me ! !

 

Get you a volt meter and follow the power, hook it to the battery and then follow the power wire down and so on...see where the power is stopping..

 

Don't forget to check the 30 Amp fuse under the seat. It's under a boot on the left side of the wiring cluster, in front of the battery. There is usually a spare fuse directly underneath the box.