I am rebuilding a wrecked 91 F2 and unknowingly purchased a wheel off of a 95. The 91-94's have the speedo assembly on a hub on the front wheel. The later models don't. So my question is how do I retrofit a newer wheel onto an older bike. I'm not worried about the speedo, I just need to know how to space it out. Does anyone have any dimensions for the spacers on the 95 model bikes. I read on another post that the forks for the F3 are the same. So that would mean that the spacers off a 95 should mount right up on the 91 right? I am stuck, got the whole bike back together except the front wheel. Any help is greatly appreciated.

 

Yea just get the spacers from the 95 f2 or 96 f3 I put f2 shocks on my f3 and the wheel mounted right up with the f3 spacers try ebay,local bike shop, orhttp://www.ronayers.com for the spacers...good luck

 

Thank you very much. That makes sense if the forks are the same, the only difference would be the wheels and the spacing. Thanks again!!