CBR 600F2 1991 - 1994 CBR 600F2

Bike wont start after it is warmed up

Thread Tools
 
Search this Thread
 
  #1  
Old 08-04-2009, 02:23 AM
phillycheese917's Avatar
Junior Member
Thread Starter
Join Date: Aug 2009
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Bike wont start after it is warmed up

Hey everybody,
I went and checked out a 1993 cbr f2 to possibly buy it and I had a few question to some problems that were occurring. When I went to the guys house he told us that the bike hasnt been run in a little while because he has been out of town. Also, the bike is originally from Seattle. I am in Florida. First thing is first, it took a little while to get it started. Everytime we would get it started as soon as you put it in 1st it would stall out. So we decided to choke it and let it run for a few min. Once we did that all was well and I took the bike for a ride. The bike ran fine and went through all the gears and everything. I came back to the guys place and then let my more experienced friend take it for a spin also. When he got back he shut the bike down and tried starting it up to see if it would. Well it didnt. When we pressed the start button nothing would happen. We then tightened the battery terminals and tried it again. The starter was turning and everything but the bike wasnt starting. At this point the bike was well enought warmed up. I was wondering if anyone here could possibly tell me what may have been wrong, or some things that could cause problems like that. Also, I think I remember my friend mentioning that the carbs seemed a little gummy. Thanks
 

Last edited by phillycheese917; 08-04-2009 at 02:31 AM.
  #2  
Old 08-04-2009, 02:34 AM
dojomojo's Avatar
Member
Join Date: Jul 2009
Location: Duluth, Georgia
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Default

engine could be flooding out. how long was he exactly out of town? unless it was a month or more could have crap in the petcock from the tank. Drain the carbs, clean the petcock, and try then. thats all i can think of.
 
  #3  
Old 08-04-2009, 12:50 PM
g32bturbo's Avatar
Senior Member
Join Date: Jul 2008
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default

if u push the start button and nothing happens, i'm pretty sure the carbs are not the main issue. if u've got clogged carbs and that's it, the engine would still try to turn over
 
  #4  
Old 08-04-2009, 02:34 PM
Dissevered's Avatar
Senior Member
Join Date: Jul 2009
Location: Pittsburgh, PA
Posts: 769
Likes: 0
Received 0 Likes on 0 Posts
Default

probably needs a new battery
 
  #5  
Old 08-04-2009, 03:08 PM
swnp101's Avatar
Junior Member
Join Date: Jul 2009
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

Or very likely the reg/rec is blown/faulted.
 
  #6  
Old 08-05-2009, 12:47 PM
dojomojo's Avatar
Member
Join Date: Jul 2009
Location: Duluth, Georgia
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by g32bturbo
if u push the start button and nothing happens, i'm pretty sure the carbs are not the main issue. if u've got clogged carbs and that's it, the engine would still try to turn over
Mis-read it, my bad. i need to stop cruising forums when i cant sleep.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
uptoodamlate
CBR 600F
1
08-31-2010 06:25 PM
tagger609
CBR 929RR
1
06-27-2008 02:09 PM
Bibdrums
CBR 600F2
6
09-26-2007 11:31 PM
arc_55
F4i - Main Forum
8
07-15-2007 08:35 PM
B_izzlee
F4i - Main Forum
6
05-11-2007 12:41 AM



Quick Reply: Bike wont start after it is warmed up



All times are GMT -5. The time now is 06:26 AM.