would that work?

 

No.

Biggest you should go is 170, but then again, you shouldn't if you have an f2 because the rim is only 4.5 inches which a 160 is suitable.

 

I'm running a 190 with the stock wheel and hugger and it works great! [8D]

 

Hey rick are you reall running a 190?? That cannot be a f2 wheel!! LOL can it?? If so how did you do it!?

 

[sm=ttiwwp.gif]

 

If you guys put wider tires on a 4.5 inch rim, it doesn't increase the contact patch. It will look rounder and not as flat as you guys would expect. And if you are doing that, good luck.

 

wow what wheel is that on? any pics?

a 180 on a f3 wheel looks and rides fine

heres mine

http://i293.photobucket.com/albums/m...9/P7270399.jpg

 

Ill take a pic and post it tomorrow, my camera is at work and Im off today, [sm=happy046.gif][sm=icon_cheers.gif] [sm=shades.gif]
As far as I know, its a stock 93 F2 wheel, and it had a 170 Metzler on it that would spin just cracking the throttle in first and 2nd.I was planning on going up to a Shingko 180, but when I went to my favorite bike shop for a tire, he only had 190s, and thought it would fit, so we put it on, low and behold, it does. My hugger was a little warped anyway, so I had to make some make some wooden wedges and stick em between the tire and the hugger in a few spots, and then warm it up with a heat gun just a little, let it cool and now it fits like a glove, better than it did when I got it with a 170 on it. [sm=shades.gif]

 

I'll stick with my 160

 

Well thats whats up! Can you post the exact mesaurements of your tire Rick??!