Hey all,
So i have a 94 f2 fighter i built last year and this year im continuing the build since i didnt finish before riding season caem around. Anyways I picked up a set of 01 gsxr750 forks and rims buuut the rear rims is almost 2 inches wider at the hub with cushdrive attached... therefore it wont fit in the stock f2 swingarm. Whos done this swap and what do you do about mixmatched rims? I cant stand having a 3spoke front and 6 spoke rear. any ideas will be much appreciated. I'm trying to avoid building a swingarm for this thing lol. thanks

 

sounds like a predicament - I haven't really heard of too many people swapping out rear wheels for anything other than F3 or 900 rear wheels - which typically keep everything looking the same with the Enkei slanted 6 spoke.

Have you considered a custom swingarm or trying to make the suzuki swingrarm for that year 750 fit?

Ht up pmb5 on this thread - he's done a K5 front end on his - he might have a plan for a matching rear:https://cbrforum.com/forum/showthrea...=119459&page=4

 

I am doing a Gsxr inverted Fork swap. I don't know if you can fit the rear wheel in there. The fork swap is a Racer swap and primarily don't try to match the rims. At 60 mph no one will notice, IMO.

 

Well I know for a fact the rear rim does not fit. And i have considered a custom swingarm. I worjk at a fabrication shop and have everything at my disposal. This is not my race bike either so I would like matching rims. This bike is a daily rider and it will be entered in shows. thanks for the help so far