Hello From Greece!

Last week i bought a Honda CBR 1000RR 08' i want to buy a Talormade exhaust the problem it that on european bikes the sensor is on the exhaust tha you are going to remove but on us bikes the sensor is on a pipe.. so you don't have any problem on put it on. I want to order from US this exhaust but i don't know what to do . . . any sugestions?

Thank you!

 

just take that sensor off.

 

there must be an other solution. . . it's not that easy just take it off and thats it, i can take it off from the stock exhaust not from the bike. Anyone who has European CBR 1000RR 08 and has a taylormade could help me.

 

I would suggest that you contact Taylormade for their recommendation.

 

If you are talking about an oxygen sensor, you can just drill a hole in the taylormade and weld the sensor nut on and voila.. exhaust shop should charge no more than 30 bucks to do so. Buddy with a welder a six pack...

 

hi GhostRideRSpeeD,

i'm from Saudi Arabia and i'm having eurpean cbr1000rr09. when I installed the Taylormade, I just took the whole wire off. U will be getting a jumper to eliminate the O2 light.

that's it

Regards,
Talal