Not perfect, but 'Pretty Good'
#1
#3
God knows. I even warmed the fabric as I went, and can only think that when it cooled, it wrinkled like an old prune. But hey, upholstery is not a job I would jump to. Ill have another go though, waste some time in the process, then send it off to be done properly.
Last edited by bullroarer; 09-15-2015 at 01:25 AM. Reason: spelling !
#5
#7
Clean: Rear swing arm off, sand blast, paint, new swing arm bearings and bushes, seals. Chain off, sprockets off, all fairings off, rad off and pressure test and repaint,rad guard off and sand blast and repaint, fan off, blast and repaint, front and rear wheels new bearings (NTN) with seals, new Honda rear disc and pads, pistons and seals in both front and rear calipers and pads, steel nipples, clutch and brake lever seals, headstock taper bearings renew, polish handle bars, and replace all fairing fixings and m6 bolts to stainless.
Havnt touched the engine yet, as its super quiet and rattle free, so other than chainging the oil filter and checking plugs and do a compression test that'll be all for the mo.