Ignition switch
#11
08-08-2011, 06:49 PM
Retired Super Moderator - At large E=MC2
It's a bit of a pain pulling the ignition. There are usually 2 bolts with a
torx head, on the under-side.
Get the socket torx head for a 3/8 drive and a 3" extension.
Don't try this without the proper driver, you'll borq the bolt-heads
(they are lock-tite'ed in). After that, a competent lock-smith can set you up.
Ern
torx head, on the under-side.
Get the socket torx head for a 3/8 drive and a 3" extension.
Don't try this without the proper driver, you'll borq the bolt-heads
(they are lock-tite'ed in). After that, a competent lock-smith can set you up.
Ern
Thread
Thread Starter
Forum
Replies
Last Post
