1990 1000F: The banjo fitting at the end of the brake hose is curved where it connects to the master cyclinder. When it is connected, does it curve inwards toward the front wheel (and away from the master cyl.) or does it curve outwards away from the front wheel (towards the master cyl.)?

thanks all

 

Hi there , mine is a 1991 and the banjo connector curves toward the master cylinder , away from the front wheel.

 

Maybe look here- does it help? http://fiche.ronayers.com/Index.cfm/...ASTER_CYLINDER

 

thanks guys. hard to tell from the micro fiche but I vaguely remmebr it curving toward the Mast. cyl as mentioned in first reply. thanks again.