This morning, I drop the bike
I had it on the center stand and I thought is was on the side stand, I grab it and it fell to the right.

I have a small scrach on the wind sheild,
badly scrach slider,
some scatches on the crank cover,
plus a brocken mirror bracket
and a hole in my leg. (must have been the side stand)

So my questions are:
is there anything to remove scrarches from the sheild
I got another mirror from the wreakers, but now thats has a brocken bracket as well, where can I get these brackes from or is there anothere way around this.

 

Not good to hear I use Synpol polish it is even good on CDs that are scratched. How far out do your sliders sit mine are 50mm to the out side to panel.

 

If I place some carboard along the fairing, underneth the slider to give me a line, 25+mm
Has anyone had success with aftermarket mirrors?

 

Mine has a dodge mirror on the right witch ioff a later model only one bar. I am going to change it for thecorrect one, It is white is it any good to you.

 

I've got an aftermarket mirror on my '95. It looks the same as stock and works fine- never blurs up.


[/align]

 

If the bracket is OK (that weak alloy piece that hold the mirror bar on, has one adjust bolt and 2 mounting screews)

 

The bracket has a part number on it MS2-R

 

No part number (i can find)


[IMG]local://upfiles/2378/648DE6DB41C6435598AAD682A8A1ABA2.jpg[/IMG]

 

it looks different the mirror dose not remove from the mount.

 

Thanks for trying, I think I will buy an aftermarket one, or see if my brtoher can weld it into one piece.