CBR600F2 Race Bike For Sale **** Sold!!! ****
 

**** Sold!!! ****


As I've mentioned elsewhere, it's time to move forward, and sell my trusty old F2. It's a '93, with 27,500 total miles. It does have a clean, non-salvage Kansas title, though putting it back to street duty would require more work than it's worth.
This bike is ready to race, and would be a great first race bike, or WERA V7/CCS or CMRA "Classic" machine.
Just over 390 lb., with a full tank, ready to race.

• Cheetah race bodywork (lightened OEM seat w/supersport tail)
• Zero Gravity double-bubble
• Entire bike safety wired with spring clips for quick work
• Frame sliders/swingarm lift spools
• Fox Twin-Clicker shock with about 700 miles since service
• F3 fork internals w/Race Tech springs - less than 600 miles since new fluid, wipers, & seals.
• Airtech F3 front fender
• F3 rear wheel
• Bridgeport right-angle valve stems
• EBC 310mm floating rotors w/caliper relocation bracket
• EBC petal rear rotor
• Russell braided lines up front/Galfer braided line in rear
• Russell speed bleeders on front calipers
• Carbone Lorraine race pads with lots of life left
• 900RR front M/C with LP billet cap
• Rear M/C reservoir delete/Tygon tube replacement
• CRG adjustable billet race levers
• Vortex Clip-ons with Rental Kevlar Superbike grips
• Pro-Tek billet rearsets
• Lefthand switchgear delete/Motion Pro standalone choke cable
• Vortex Keyless gas cap
• Two Brothers race header with shortened Yoshimura CF RS-3 can
• Handmade/polished aluminum exhaust hanger
• K&N filter - carbs jetted for filter and exhaust system
• NRC stator and pulse generator covers
• Factory Pro shift kit
• EBC Kevlar race clutches with less than 500 miles
• Recent oil change w/
• Total-loss charging system w/Alien Motion 8-cell LiPo race battery
• Race only wiring harness
• Race ignition
• Graves fairing stay
• Koso RX-2 digital gauge set
• D.I.D. 520 ERV3 race chain w/about 600 miles
• AFAM 14tooth front/41 & 43 rear sprockets w/about 600 miles
• Swingarm trimmed and powder-coated/new black anodized aluminum chain guard
• Brand new NGK plugs
• Recently replaced CDI
• AllBalls bearings/seals in all four wheels, with the exception of 1 sprocket carrier

Will come with Dunlop slicks mounted (worn), as well as Dunlop GP209/GP211A DOT race tires (med compound/1 race & two practice sessions on them), and a set of Michelin DOT Race Power Cup V Front/Power One rear (both med. compound - likely good for 1 more track day.)
Extra rim set for wet races with new Dunlop rains, front and rear OEM rotors, bridgeport right-angle valve stems, and sprocket carrier/cush drive.

$2000 - Bike is in Kansas.

https://farm4.staticflickr.com/3876/...4ebc118c_z.jpg

https://farm3.staticflickr.com/2879/...a7f643bc_z.jpg

https://farm6.staticflickr.com/5573/...95b7960a_z.jpg

https://farm4.staticflickr.com/3730/...77512545_c.jpg

https://farm4.staticflickr.com/3856/...9d728a3c_c.jpg

https://farm3.staticflickr.com/2901/...ea374800_b.jpg

https://farm4.staticflickr.com/3874/...f8e5da49_b.jpg

https://farm4.staticflickr.com/3861/...65dd7850_b.jpg

https://farm4.staticflickr.com/3922/...c72c563fbe.jpg

https://farm4.staticflickr.com/3895/...de63727d93.jpg

https://farm3.staticflickr.com/2899/...97c2b5f94a.jpg

https://farm3.staticflickr.com/2930/...85c3ee6c00.jpg

**** Sold!!! ****