1000RR Rear fender removal
 

can someone give me a detailed walk through of the removal of the rear fender(License plate holder and plastic surrounding the exaust). To include step by step removal of each part. Im sure this is on another post but i was unable to locate anything good. Thanks guys for the help.

RE: 1000RR Rear fender removal
 

http://img116.imageshack.us/img116/1...board011dy.jpg

RE: 1000RR Rear fender removal
 

haha..gotta digest that bro!! happy unscrewing...

RE: 1000RR Rear fender removal
 

Holy $hit...does all this have to be done to do something as simple a fender eliminator kit? Sorry to act so surprised but I'm new to this and I love my bike whole and not sure if I'd be able to get it back together again...

RE: 1000RR Rear fender removal
 

It's not all that difficult. My FE came with instructions. It's not hard and not very many bolts at all to remove the stock setup.

You can do it. ;)

RE: 1000RR Rear fender removal
 

You will not have a problem. Trust me when I say if I can do it you can too. 90% of trying to do your own work is having the confidence to try. The other 10% is having the right tools. ;). If you still don't feel comfortable after taking your time just take pictures as you go.

RE: 1000RR Rear fender removal
 

Thanks guys...I'm gonna give this a whirl...I'm ordering a fender eliminator kit...I'll let ya know how it goes!

RE: 1000RR Rear fender removal
 

does anyone have their directions to the FE. I just need to know how to get the seat and all the farings off......

RE: 1000RR Rear fender removal
 

Remove the seat first, lift the corner of the seat close to the tail and remove the hex screw facing straight up. Do the same thing to the other side. Take off the seat. There are 4 hex screws holding the tail fairing on. Take off the pillion and remove the 2 screws where you see it holding tail plastic. Then remove the 2 screws on the side close to where the seat screws were. Removing the tail faring requires a little bit of pulling on one side but it comes off relatively easy, oh yeah disconnect the tail light. After that it's just a matter of removing 4 bolts and 2 screws to remove the fender. Clip the signal lights and license plate light. Rest is up to the F/E manufacturer. Enjoy...

RE: 1000RR Rear fender removal
 

although i didn't start the post i wanted to thank everyone for their input. my f/e will be in tuesday and this gave me a good head's up on what to expect.