valve clearance help....

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

valve clearance help....

Printable Version

CBR >> Past CBR Models >> CBR 900RR >> valve clearance help....

Page: [1]

Message

<< Older Topic Newer Topic >>

valve clearance help.... - 4/9/2008 4:10:25 PM

bindelsf2

Posts: 1329
Joined: 5/7/2006
From: YES THAT IS A 900 ENGINE IN A F2 ON SPRAY
Status: offline

if anyone has a clymers could you please tell me what the valve clearance is for the 893cc... i have a clymers but its for the f2 and i have the 900 engine in it and i dont want to buy a manual just for valve clearance...

and yes i did multiple searches and nada..

_____________________________

nitrous is like a slut, you wanna hit it but are scared of the consequences!

honda CBR 600F2/900RR
-93 900RR ENGINE (893cc)
10" stretch
-NOS
-D&D race series exhaust
-Stage 7 jet kit and single filters
-98 F3 tail
-pingel rear strut

Post #: 1

RE: valve clearance help.... - 4/10/2008 2:42:00 AM

DukeCBR

Posts: 262
Joined: 3/1/2008
From: Cape Town, South Africa
Status: offline

Hey there bindelsf2

I have a Heynes manual for the 96 to 99 CBR900. I sent a screenhsot of the manual with the valve clearance section. There is a block circled in red for you to use as a reference if you get any more replies. I would assume that this is the valve clearance for pre-96 Fireblades.

Hope it helps.

Attachment (1)

_____________________________

1993 Honda CBR 900RR Fireblade
Steering Damper
DynoJet Stage 1 Kit
Twin Race Foam Filter
Hindle pipe

(in reply to bindelsf2)

Post #: 2

RE: valve clearance help.... - 4/10/2008 2:13:32 PM

bindelsf2

Posts: 1329
Joined: 5/7/2006
From: YES THAT IS A 900 ENGINE IN A F2 ON SPRAY
Status: offline

good stuff!! thanks a ton. thats what i thought it was but wanted to be sure!!

thanks again!

_____________________________

nitrous is like a slut, you wanna hit it but are scared of the consequences!

honda CBR 600F2/900RR
-93 900RR ENGINE (893cc)
10" stretch
-NOS
-D&D race series exhaust
-Stage 7 jet kit and single filters
-98 F3 tail
-pingel rear strut

(in reply to DukeCBR)

Post #: 3

RE: valve clearance help.... - 4/14/2008 2:21:26 PM

bindelsf2

Posts: 1329
Joined: 5/7/2006
From: YES THAT IS A 900 ENGINE IN A F2 ON SPRAY
Status: offline

can anyone else verify that the 893cc and the 919cc are the same.... thanks a TON!!

_____________________________

nitrous is like a slut, you wanna hit it but are scared of the consequences!

honda CBR 600F2/900RR
-93 900RR ENGINE (893cc)
10" stretch
-NOS
-D&D race series exhaust
-Stage 7 jet kit and single filters
-98 F3 tail
-pingel rear strut

(in reply to bindelsf2)

Post #: 4

RE: valve clearance help.... - 4/14/2008 7:25:34 PM

SpiritRR

Posts: 1894
Joined: 8/3/2007
From: the Paddock
Status: online

Intake valve clearances are the same for all models. Exhaust valves are the same for 93-97.

Intake: 0.13--0.19 mm

Exhaust:

93-97 0.19--0.25 mm
98-99 0.22--0.28 mm

Obviously, if you're running the 893, the 93-97 bracket is where it's at. Good luck bindel!

_____________________________

(in reply to bindelsf2)

Post #: 5

RE: valve clearance help.... - 4/15/2008 2:10:52 PM

bindelsf2

Posts: 1329
Joined: 5/7/2006
From: YES THAT IS A 900 ENGINE IN A F2 ON SPRAY
Status: offline

good deal. i got them all done last night and thats what i used... thanks again guys!

_____________________________

nitrous is like a slut, you wanna hit it but are scared of the consequences!

honda CBR 600F2/900RR
-93 900RR ENGINE (893cc)
10" stretch
-NOS
-D&D race series exhaust
-Stage 7 jet kit and single filters
-98 F3 tail
-pingel rear strut

(in reply to SpiritRR)

Post #: 6