valve clearance help.... (Full Version)

CBR Forum >> Past CBR Models >> CBR 900RR

valve clearance help....

  

bindelsf2 -> valve clearance help.... (4/9/2008 4:10:25 PM)

if anyone has a clymers could you please tell me what the valve clearance is for the 893cc... i have a clymers but its for the f2 and i have the 900 engine in it and i dont want to buy a manual just for valve clearance...

and yes i did multiple searches and nada..

  
DukeCBR -> RE: valve clearance help.... (4/10/2008 2:42:00 AM)

Hey there bindelsf2

I have a Heynes manual for the 96 to 99 CBR900. I sent a screenhsot of the manual with the valve clearance section. There is a block circled in red for you to use as a reference if you get any more replies. I would assume that this is the valve clearance for pre-96 Fireblades.

Hope it helps.

bindelsf2 -> RE: valve clearance help.... (4/10/2008 2:13:32 PM)

good stuff!! thanks a ton. thats what i thought it was but wanted to be sure!!

thanks again!

bindelsf2 -> RE: valve clearance help.... (4/14/2008 2:21:26 PM)

can anyone else verify that the 893cc and the 919cc are the same.... thanks a TON!!

SpiritRR -> RE: valve clearance help.... (4/14/2008 7:25:34 PM)

Intake valve clearances are the same for all models. Exhaust valves are the same for 93-97.


Intake:  0.13--0.19 mm

Exhaust:

93-97   0.19--0.25 mm
98-99   0.22--0.28 mm

Obviously, if you're running the 893, the 93-97 bracket is where it's at. Good luck bindel!

bindelsf2 -> RE: valve clearance help.... (4/15/2008 2:10:52 PM)

good deal. i got them all done last night and thats what i used... thanks again guys!

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.