Can you help - where can I buy an APE CCT

[hkwiz]

I live in Hong Kong and cannot find any supplier who can source one. Any idea of companies who can ship one to me?
Cheers

[skoobydoobie]

ebay.

[Incognito]

The one I bought wasn't labeled as APE, but it's identical.

[agent orange]

ebay..

[NYKnick1015]

ebay def... might have to pay more for shipping but my shipping was less than 2bucks tho

[zmds18]

okay guys if you read he said hes from hong kong.... if he logs onto the us ebay its going to be all in us <<<<<----- (wow im a dumb @$$ i meant english) and he wont be able to read it.... someone post a link to one on ebay so he knows otherwise hes hunting blind... unless he knows english in that case i with drawl my statement.... haha

(i would but i have no idea whats hes asking lol)

[2H company]

I guess living in Hong Kong might be beneficial. A lot of different suppliers of fairing kits are from over there
I quit trying to buy anything from abroad. That stator cover I tried to get, never came...

But back to the subject. Try ebay, there must be someone with international shipping option. If no one is there, then... don't know to be honest. Checked local shops?

[ID_CBRRider]

Why buy an APE??
Just remove your old hydraulic one.
Gut the insides out of it so your left with just the cone shaped case.
Drill out the backside of it, where you removed the bolt holding the hydraulic unit in. Run a tap through where you drilled.
Cut about a 5 1/2" piece of All-Thread that matches your tap.
Run the all thread through the casing.
Put two lock nuts on the outside of the casing reinstall the unit and adjust your pressure like you would with any other manual.
And your done, one hydraulic CCT turned into a manual.

I did this and it cost me a grand total of about 15 bucks. But that's because I didn't have the tap I needed. take out that 10 bucks and it actually cost me about 5 bucks.

And if your worried about how long it will last, I've got 15k miles on my bike since I did this and not a sound has come out of it.

[NYKnick1015]

Originally Posted by zmds18

okay guys if you read he said hes from hong kong.... if he logs onto the us ebay its going to be all in us <<<<<----- (wow im a dumb @$$ i meant english) and he wont be able to read it.... someone post a link to one on ebay so he knows otherwise hes hunting blind... unless he knows english in that case i with drawl my statement.... haha

(i would but i have no idea whats hes asking lol)

im pretty sure he speaks english if he can post here fine and we can read it

also there is an ebay japan so he wont have to worry about language
http://www.ebay.co.jp/

Originally Posted by ID_CBRRider

Why buy an APE??
Just remove your old hydraulic one.
Gut the insides out of it so your left with just the cone shaped case.
Drill out the backside of it, where you removed the bolt holding the hydraulic unit in. Run a tap through where you drilled.
Cut about a 5 1/2" piece of All-Thread that matches your tap.
Run the all thread through the casing.
Put two lock nuts on the outside of the casing reinstall the unit and adjust your pressure like you would with any other manual.
And your done, one hydraulic CCT turned into a manual.

I did this and it cost me a grand total of about 15 bucks. But that's because I didn't have the tap I needed. take out that 10 bucks and it actually cost me about 5 bucks.

And if your worried about how long it will last, I've got 15k miles on my bike since I did this and not a sound has come out of it.

I think thats a little complicated... im somewhat mechanically inclined but thats a bit of work and trial and error with that

[2H company]

also there is an ebay japan so he wont have to worry about language
http://www.ebay.co.jp/

I think he will need Chinese more than Japanese, but he might know both.

There must be an easier way to find the tensioner, and I'm sure he already found one.