CBR600F2 Race Bike For Sale
#1
CBR600F2 Race Bike For Sale **** Sold!!! ****
**** Sold!!! ****
As I've mentioned elsewhere, it's time to move forward, and sell my trusty old F2. It's a '93, with 27,500 total miles. It does have a clean, non-salvage Kansas title, though putting it back to street duty would require more work than it's worth.
This bike is ready to race, and would be a great first race bike, or WERA V7/CCS or CMRA "Classic" machine.
Just over 390 lb., with a full tank, ready to race.
Extra rim set for wet races with new Dunlop rains, front and rear OEM rotors, bridgeport right-angle valve stems, and sprocket carrier/cush drive.
$2000 - Bike is in Kansas.
As I've mentioned elsewhere, it's time to move forward, and sell my trusty old F2. It's a '93, with 27,500 total miles. It does have a clean, non-salvage Kansas title, though putting it back to street duty would require more work than it's worth.
This bike is ready to race, and would be a great first race bike, or WERA V7/CCS or CMRA "Classic" machine.
Just over 390 lb., with a full tank, ready to race.
- Cheetah race bodywork (lightened OEM seat w/supersport tail)
- Zero Gravity double-bubble
- Entire bike safety wired with spring clips for quick work
- Frame sliders/swingarm lift spools
- Fox Twin-Clicker shock with about 700 miles since service
- F3 fork internals w/Race Tech springs - less than 600 miles since new fluid, wipers, & seals.
- Airtech F3 front fender
- F3 rear wheel
- Bridgeport right-angle valve stems
- EBC 310mm floating rotors w/caliper relocation bracket
- EBC petal rear rotor
- Russell braided lines up front/Galfer braided line in rear
- Russell speed bleeders on front calipers
- Carbone Lorraine race pads with lots of life left
- 900RR front M/C with LP billet cap
- Rear M/C reservoir delete/Tygon tube replacement
- CRG adjustable billet race levers
- Vortex Clip-ons with Rental Kevlar Superbike grips
- Pro-Tek billet rearsets
- Lefthand switchgear delete/Motion Pro standalone choke cable
- Vortex Keyless gas cap
- Two Brothers race header with shortened Yoshimura CF RS-3 can
- Handmade/polished aluminum exhaust hanger
- K&N filter - carbs jetted for filter and exhaust system
- NRC stator and pulse generator covers
- Factory Pro shift kit
- EBC Kevlar race clutches with less than 500 miles
- Recent oil change w/
- Total-loss charging system w/Alien Motion 8-cell LiPo race battery
- Race only wiring harness
- Race ignition
- Graves fairing stay
- Koso RX-2 digital gauge set
- D.I.D. 520 ERV3 race chain w/about 600 miles
- AFAM 14tooth front/41 & 43 rear sprockets w/about 600 miles
- Swingarm trimmed and powder-coated/new black anodized aluminum chain guard
- Brand new NGK plugs
- Recently replaced CDI
- AllBalls bearings/seals in all four wheels, with the exception of 1 sprocket carrier
Extra rim set for wet races with new Dunlop rains, front and rear OEM rotors, bridgeport right-angle valve stems, and sprocket carrier/cush drive.
$2000 - Bike is in Kansas.
Last edited by JNSRacing; 09-26-2014 at 09:22 AM. Reason: Bike is sold!
Thread
Thread Starter
Forum
Replies
Last Post