Parking my bike at a shopping mall, this old lady didn't see my bike and gave me this bent exhaust pipe.

Is there a way to fix bent exhaust pipes?

Btw, it is a yoshimura TRS exhaust pipe on a '05 F4i.

Thanx

Yeh you can fix em. Depends what area and how severe the damage etc. If it's really bad I wouldn't ride it.

Which part of the exhaust was bent? How big is the bend? Could you post a pic. of it? Is it titanium?

It's not that bad. I'll try to take a pic tomorrow morning and send it here.

Here are the pictures:

http://img407.imageshack.us/img407/493/pipe1sd1.jpg
http://img201.imageshack.us/img201/94/pipe2wu6.jpg
http://img406.imageshack.us/img406/9766/pipe3pk3.jpg

you are lucky that she didnt tip the bike over. Take the exhaust apart and hit the dent out from the inside or try a paintless dent removal system. Either should work.

i just took my rs5 pipe apart 2 day well ur best bet try not to cut the weld out just drill out the rivets the one that hold the yoshi tag on has to come out the one on the end and use a flat screw driver to break it loose and slide it off the can and knock it out slide back on and rivet it back on