I wrecked my bike about a year ago and have finally decided to part it out rather than piece it back together. I have pretty much everything on it, other than the headlight, upper fairing hold. The left fairing, when you are sitting on the bike, has a piece broken off of the top corner towards the front. The right side fairing and most of the other plastics are in good shape. I was able to find another front cowl that will be for sale as well. The bike was the red/black color scheme, but the cowl is from a white/blue bike.

Everything is avaliable, let me know what you would like to purchase and we can do payment through paypal or money orders.

I will get pics up hopefully tonight.

Definitly, send some pics CDrewferd. I'm interested...

I could use some fairing pieces, those that fit over the fuse box and radiator cap. I'd like to see a picture of the left side (as you sit on the bike) fairing, too.

I'll get pics up tonight.

I am needing the small sidecovers above the shifter and the rear brakelever:D

Here are some pics;
right middle fairing

http://i190.photobucket.com/albums/z260/cdrewferd/P1010030.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010029.jpg

left middle fairing

http://i190.photobucket.com/albums/z260/cdrewferd/P1010028.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010027.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010026.jpg

speedo cluster

http://i190.photobucket.com/albums/z260/cdrewferd/P1010025.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010024.jpg

radiator cover scratch

http://i190.photobucket.com/albums/z260/cdrewferd/P1010023.jpg

fuse blockcover scratch

http://i190.photobucket.com/albums/z260/cdrewferd/P1010022.jpg

both covers

http://i190.photobucket.com/albums/z260/cdrewferd/P1010021.jpg

guage surround

http://i190.photobucket.com/albums/z260/cdrewferd/P1010016.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010020.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010019.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010018.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010017.jpg

right fairing

http://i190.photobucket.com/albums/z260/cdrewferd/P1010013.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010014.jpg

left fairing

http://i190.photobucket.com/albums/z260/cdrewferd/P1010008.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010009.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010010.jpg
http://i190.photobucket.com/albums/z260/cdrewferd/P1010011.jpg

as it currently sits

http://i190.photobucket.com/albums/z260/cdrewferd/P1010015.jpg

dang pics won't show, can somebody help me out here?

how mauch are you asking for it? can you e -mail pics to me?

I'll take $1000 for the whole bike as it sits. Only need the left fairing, headlight, curved fairing that goes behind the front tire, and paint to get streetable again.

see the cover right behind the shifter and above the footpeg in the last pic you posted? that is what I need for both sides .... how much you want for both of those with shipping to north carolina thanks

Drew, how about the water hose joint I asked on the other thread? is it in good shape? Thanks.

sorry to here about your ride. i hope your ok. i smoked the engine in mine. how much for the whole engine? im very interested. if your interested in making this easier i can be reached at 330-441-1271
Jim

1stcbr,

Give me a zip code and I'll figure out shipping costs and then give you an actual cost.

Daniel_ARG,

I would like to sell the motor whole so that it's not missing pieces if somebody wants to buy the whole thing like bigjim. Though if he just messed up the internals on his he might have the one off of his blown motor to sell you.

bigjim44256,

Give me a zip code so I can see about shipping. Not sure it it'll be worth it but we can give it a shot.

actually my zip code is 44256(Medina, OH).slick eh? id have you ship it to my work so someone is there to recieve it. it would be the same shipping cost i think but the zip code there is 44212(brunswick, OH)

ORIGINAL: cdrewferd

1stcbr,

Give me a zip code and I'll figure out shipping costs and then give you an actual cost.
Belews Creek, NC 27009 thankyou

Sorry for taking so long to get back to you guys.

1stcbr,

Shipping is going to be pretty cheap. I found that these go for about $100 each new. How about we do $100 including shipping? Let me know what you think.

bigjim44256,

I haven't had a chance to pull the engine to get an actual weight to figure out shipping. I am really not sure what to ask as far as a price as I can't find one anywhere to price compare with. I was thinking somewhere around $600 plus shipping, but wasn't sure if that was fair or not.

Drew, to be perfectly honest i was thinking of offering 6 if runs good. i see your machine has quite a few miles on her, mine only had 31,000 when i cooked it. but i know mine had many rough miles.as for the shipping, i have a friend that drives for panther 2 and i was going to ask him if he would pick it up for me. the only thing is we would need to wait till he was in the area. if this is something that is feasible let me know. what i do know is that thing should weigh about 110-125 lbs. something like that. it might need to go truck lines or moving company, somethinglike that.been awhile since i picked mine up off the floor. let me know what your comfortable with and we'll go from there.

Jim

Jim,

It runs great. I was averaging 47-50 mpg if I shifted before 6k. The only thing that I was going to do as maintanence was do a valve job and sync the carbs. That doesn't even need to be done, it runs great and will red line with the best of them. It can stay in my garage till he's in the area, no big deal. I only rode it hard a couple times right after I bought it. Then I found out that it still had it's balls and I never really rode it hard again. The guy that I bought it from bought it when it only had 2k miles on it. He had it for about 15 years and kept it in great shape. I put about 10k on it in the year that I rode it, almost all highway.

lower cowl doesn't fit the 87 1000f does it?

Thanks,
Patrick

ORIGINAL: cdrewferd
1stcbr,
Shipping is going to be pretty cheap. I found that these go for about $100 each new. How about we do $100 including shipping? Let me know what you think.
thanks but I bought a set on ebay for 35.00 shipped

Well... I asked my friend about picking up the engine for me. He says he doesnt go to colorado very often and it would probable be wisest to have it shipped. Im going to look into this more at work to see what it will cost. I would probably have fedex freight come to your house and pick it up. i'll do a little research and get back to ya. also, doyou have any idea if your bike is a california model or not? it makes no differance im just curious.
Jim

Drew, I need your zip code so i can put together a price for the shipping. I'll be using Fedex freight. Thanks Jim

My zip is 80021.

Also, bike is a Colorado bike.

Drew, everything with fedex is ok at my end. You havent yet said no so i assume(which i know is the wrong thing to do)your ok with that. whenever you get the engine removed and are ready to ship i will need to know an accurate weight. 149lbs is the change point. so if you could please give me an idea of what were lookin at with weight. a bathroom scale is close enough for this kind of government work. i would weigh what i have but i dont know what all your goingto ship with your engine, plus mine is in lots of pieces somewhere in that thing i call a garage. so i guess just keep me posted on these items as best as you can and we'll have a deal here. also what do you have in mind for payment options? im set up with paypal, check in the mail, whatever, just let me know. thanx Jim

I'm working on pulling some parts for another member right now. I would ship probably just the engine and carbs,but I can include anything else related to the engine that you need. I will drain all the fluids, asI'm sureFedEx doesn't want tohave to deal with any of that. I have another member that is buying the clutch, so I can leave the trans together and attatched, or I can pull it. I'll try to get it out tomorrow and give you an accurate weight. I'm also setup with Paypal so that would be the best way to go as far as exchanging money.

Drew, i hope you havent pulled the engine apart yet but i woild much rather not having to swap clutches from my engine to that engine. if its ok sell him my clutch and leave that one in. I'll pull it and ship wherever. please dont pull anything apart thats not necessary. lets work together here and use parts from my scrap engine, please. Jim

Sorry, I already pulled the clutch. I also broke the inner clutch when trying to undo that big nut on the inside. I'm just shipping him the packs and everything else from the packs out. It's actually not that hard to swap, I would say it will only take you about 30 minutes to swap the parts.

I got the engine pulled last night. With the air box, carbs, trans and engine it's sitting right at 200 pounds.

Let me know how you would like to proceed. As far as FedEx coming out to my house that's fine, but I don't have anything to pack this big thing in. Would probably need to put it in a crate.

Jim,

Just wondering what's going on. Are you still interested in the engine? I would like to get this out of my garage as soon as I can.

O.K. now we have a problem. I was interested in a complete running engine, not an incompletebroken one. my engine is mostly torn down ready for a rebuild. if i wanted to work on an engine i would have rebuilt mine.shame shame. i might still be interested in your parts engine though. what do you have in mind?

What do you mean an incomplete broken engine??? This engine is still complete and runs great. The clutch doesn't affect the running of the engine. What do you consider a complete engine? Do you consider the trans part of the engine? I'm now confused as to what you were expecting when you just asked about purchasing the engine.

Jim,

How about $500 for the motor as it sits? The only thing that you would have to swap is the clutch and I don't think that would take more than 30 minutes. Let me know if you are still interested. I would really like to get this engine to you so that you can get your bike going again.

Drew, i must appologize. I did not realize that you would assume the transmission was not part of the complete engine. yes you could be correct in saying the engine still runs fine but, how am i to know that the case does not need split to accomplish this repair. my case needs split and though i am capable of performing this task i do not want to split the case. meaning i would repair mine before byeing your's, it would cost me less. further more, you broke something inside your transmission, telling me you dont really know what your doing. what makes you think i will believe you when you say it will only take 30 min to repair. if it were so easy, why did something get broken? you see. i am an ASE certified technician and my colledge degree is for automotive applied science. ive wrenched in several ford dealerships and a few non specific repair shops. you can not pull the wool over my eyes. like i said, i might be interested in your parts engine/trans but thats about it. i figure at this point it is nothing more than a rebuildablecore and not worth much more than 150.00 dollars(considering aluminum scrap value is pretty high). i hope the clutch assemble that you did pull was worth it.

Wow, you really are something Jim. You are saying that you are an ASE certified tech, which litterally means nothing to me, but you think that because I made a small mistake while pulling the clutch, and broke the CLUTCH CENTER that the case needs to be split!!! Man, I don't ever want you to work on my car as it seems like you don't even know how to fix a simple clutch problem on a bike that would litterally take about 30 minutes if you knew what you were doing. Sorry I tried to give you the benifit of the doubt. If you think it's only worth $150, then go fly a kite. I don't normally react like this but it sounds like you just don't want it and are trying to find a way out. Everything on the engine is fine, nothing was damaged, only the CLUTCH CENTER which is something that you pull when you remove the clutch anyway.

It's amazing how many people say that they are an ASE certified tech but don't know crap about working on anything because it hasn't been showed to them. I'll keep my engine thank you. When I put it on Ebay I'll let you know and you can bid with everybody else, but be sure that the starting price will be higher then the $150 that you seem to think the engine is worth.

Easy there Gents. This thread is getting a little testy.

Drew, do you still have the instrument cluster and surround for that? I'm also looking for the windscreen and cowling it is secured to as well.

chris_elliott@hotmail.com

Chris,

So you need the cluster, surround, windshield, and front cowling? If this is what you need then yes I do still have everything. I sent you an email with more info.

good luck. my appologies to the unlucky winner.

Updated the pics so they would show.

I was interesed in the left fairing and was wondering have you sold it and if you still had it available what is your asking price?

I still have it. It is crackec on the front upper most edge. How about $50 plus shipping?

I think that will be ok. My email address is jatayl@swbell.net and my zipcode is 77581 for shipping calculations. Email me and we can discuss payment methods and finalize shipping costs. Thanks.

Still interested in selling? Have not heard from you.

I need this stuff gone. All reasonable offers will be considered. I have everything but the front calipers, clutch, swingarm and left fairing. Everything else is still avaliable.

Anybody need any parts? I will accept almost all offers. Need the room in my garage.

Looking for the clip-on bar ends. Shipped to 23860. I will be out of town for 10 days starting May 2nd. If you PM me I believe I get notified by email. Bobby

Hello, I need the rear fender assembly (turn signal lights, licence plate light/holder, fender assembly). It is ok if the turn signals are broken or scratched. I also need a seat, I don't care about the leather, I just needjust the frame and ring for the fuel switch. Please let me know how much for each and how much for shipping to 93401. Email me at 1990cbr1000f@gmail.com

How much for the right sidefairingand right mirror, And what would it cost to ship to 75069, THANK YOU, JIM

Do you still have all the fairings and front gages from your bike?

I have the front fairing (pics in first post), right fairing and the plastics under the seat and the rear tail. I also have the guages. I could let you have all of it for $300 plus shipping. If that's to high then let me know your budget and we can work something out. PM me if you have more questions.

Was wondering if i could get a price on a regulator rectifier shipped to 14521....need it asap

Wondering if you still have the swingarm assembly. If so, how plus shipping to 47201. Thanks

Nope don't have the swingarm, sorry.

Do you have the taillight. I just need the lens and housing, but if you don't want to sell just that, I could buy the whole assembly. Thanks, Mark Shipping to 93401

Need a back rim, left handle bar and gauges 79905 Tx. have'm?

Hello I need the gas tank and the speedo cluster how much plus shipping to 38141
Thanks
Mac

Drew do yoyu still have the upper fairing? I'm in Cheyenne so could pick it up if you are in Denver or close. Either pm me or charlie7ac@hotmail.com===Thanks=====Terry

gwizrc (http://www.cbrforum.com/showProfile.asp?memid=25910)- Shipping should be pretty cheap so what do you think about say $35 including shipping?

Kikepiz (http://www.cbrforum.com/showProfile.asp?memid=10801)- Shipping is going to be a little more since the back rim weighs so much. What do you think about $150 including shipping?

tackforce (http://www.cbrforum.com/showProfile.asp?memid=28668)- For the gas tank we could probably do $75plus shipping, the tank is in perfect shape. For the guage cluster we would need to wait and see if Kikepiz wants it or not.

Let me know what you guys think. Hope we can work something out as I want my garage back.

NEED A SET OF CARBS CBR1000F. TO YOU HAVE ANY?

ORIGINAL: JRCBX

NEED A SET OF CARBS CBR1000F. TO YOU HAVE ANY?



Carbs would be $125 plus shipping. Let me know if you are interested. I could even make you a deal on the whole motor if you want it.

WHAT WOULD YOU WANT FOR THE COMPLETE MOTOR AND SHIPPING
ORCARBS ONLY TO 86401?

pm sent.

Hello Drew,
I need the four carburetor rubber intake boots (insulators) used to mount the carbs to the head.
Total cost shipped to 23923?
Can pay with PayPal.
Please email me.
Thanks,
Greg

PI_greg - I have another guy that might be buy the whole motor, carbs included, so I will let you know if he does that or not.

Drew,
I fully understand.
Please pass on toyour engine buyer that I am interested inbuying the spare set of intake boot.

Thanks,

Greg

i need a headlight plastic frame..

Headlight and all associated fitings were destroyed in the crash.

Ok guys, I need these parts gone ASAP. No reasonable offer will be refused. If you guys haven't let me know by the end of the week what you want, it's all going on Ebay.

I think you got rid of the clip-ons earlier, but how about the subframe, shipped to Hopewell, VA 23860? Including the rear pegs.

I actually still have the clip ons. $25 plus shipping for those. As for the subframe, it doesn't detatch from the main frame section so I'm not sure how to sell you just that without cutting it off the frame. I could sell you the whole frame with a clear title, but not sure if that's what you're after.

I am new to the site. Any chance you still have the wheels?

Yep, I still have both wheels with tires still mounted. What do you think about $100 plus shipping for both, including tires? Shipping should only be about $50. The tires have some miles on them, but they probably have at least 5-8K left.

That is a better price than what I just said I would pay for just the wheels. What kind of tires do you have on them? email me some pictures please.

If theft wheelis regular f2 I'd likeif still available. Paypal?[8D]

is the front wheel still up fer grabs?....and whats more is it a 17" rim...need one like bad...let me know.

TW has first grabs on the wheels and tires. I'll let you other guys know if that falls through.

Hey Drew,

Thanks you very much, but I have already purchased a wheel set.

I was searching like crazy and found a deal before you got back to me. So do not hold them for me.

_TW

OK, so the wheels are back up for grabs. I'll attempt to get some pics tonight.

hi 1stcbr, i`m steel looking for plastics sides if you have it,the "right firing" , my zip code in Chile, southamerica, 2541451, phone here 56 32 2969604

appreciate¡¡
Cluadio

drew i`mso sorry thats your nick....tks

nolan,

Iwould be willing to sell the right side for $75 as it sits. I'm sure that shipping would be extreme though, probably $150 or more.

i see ...very good really¡¡¡ can wemake somecontact, may be phone or mail and i will advise a friend in states to catch you early

thanks a lot

NOLAN

would the carbswork on a 87? if if so how much shipped to 75028?

if you have them left, my most urgent needs right now are the rear taillight and the little round caps that go on either side of the engine. could also use a windshield.

I have the rear taillight, but the caps on the side of the engine are scratched up. The windshield is in good shape. I'll sell both for $30 plus shipping.

DO YOU HAVE ANYTHING LEFT.

Actually I do. I have only sold the swingarm, clutch, front calipers and left fairing. Make me a reasonable offer on anything else you need, or the rest of the parts.

well i need all the plastics for one and if it runs the motor can you sen me picks?

I would be interested in the rear rim ,How much are you asking?

I need alternator. I have pics of how mine looks. how much for yours?

I'd be interested in a keyed helmet holder assembly (Honda PN: 77225-MS2-003) as mine "rounded off".

Would be interested in what you would want for this assembly plus the key for it + shipping to zip 22968.

I'm also looking for two of the clips and bolts that hold the left and right top plastic pieces over the fuse access and radiator access... just the clips and bolts only.

hows it going. was wondering if you still have the speedometer if so were are you located

Sorry guys, I've been really busy and haven't had time to check this thread. If you guys still need stuff let me know. I really want to get this out of my garage so make an offer or what you need.

I have a gauge cluster - what year is your bike !

Do you still have the siliencers/mufflers for sale? if so i need some for a 94 1000f that i just got a couple days ago. Someone cut the pipes in half ?? Also the speed screen is gone and the front headlight assembly is gone for starters. I am sure there are a few other things too but for now the pipes i need badly. My area code is 45697 for shipping cost info. Thanks,Rob

As there are 10 pages :-) and I didn't read all of them, just wondering if you have the rear rotor and is it straight and over 4mm? If yes, how much?

Thanks,
Rookiekc

Would you sell the frame with the title?

Good evening,

Would hate to compromise a fairing, but if available, would love to purchase the small cover on the left faring that covers the frame slider. Also game for the clutch lever if it is not too much trouble to remove. Thanks for your time. Jeff.

is the gauge pod still for sale? i have a 1991 also, how about the complete airbox with side covers, and the rectifier? thanks, jim

still have the parts i can pay thru paypal thanks

Do you still have the siliencers/mufflers for sale? if so i need some for a 94 1000f that i just got a couple days ago. Someone cut the pipes in half ?? Also the speed screen is gone and the front headlight assembly is gone for starters. I am sure there are a few other things too but for now the pipes i need badly. My area code is 45697 for shipping cost info. Thanks,Rob

Yes I have the full exhaust still. Shipping would probably be about $50 as they are really heavy. What do you think about say $50 plus shipping?

As there are 10 pages :-) and I didn't read all of them, just wondering if you have the rear rotor and is it straight and over 4mm? If yes, how much?

Thanks,
Rookiekc

I have the rotor, it's straight, but I'm not sure on thickness and I don't have a way to measure.

Would you sell the frame with the title?

Absolutely, let me know what kind of price you were thinking and we'll try to work something out.

Good evening,

Would hate to compromise a fairing, but if available, would love to purchase the small cover on the left faring that covers the frame slider. Also game for the clutch lever if it is not too much trouble to remove. Thanks for your time. Jeff.

I can do the clutch lever, but not sure on the fairing part. I'll look tonight and let you know.

is the gauge pod still for sale? i have a 1991 also, how about the complete airbox with side covers, and the rectifier? thanks, jim

I still have all these parts. How about $150 plus shipping for everything?

still have the parts i can pay thru paypal thanks

Yes, if the parts above sell then I still have a lot avaliable. Let me know what you need.

call steve at 845-863-6327-need them badly thanks

PM sent

drew, really need the rectifier, hope to hear back today, i sent you a pm with my number, otherwise i need to look elsewhere. thanks, jim

D'ya have the chain guide ring and o-ring ?

i know this is older but im in need of some parts for my 91 and was wondering if you had any left. the things i need are the L/R bottom part fairings and the piece that goes in the middle of the 2 fairings behind the front wheel.

hi im looking for an oil pan. please let me know baserpaul@hotmail

I need a Complete Fuel Stop Cock Assembly for my '95 CBR1000F Hurricane. Can you help, mate?