This is a pair of HOMEMADE pig spotter mirrors.Bought these right here from mk3turbo. These mirrors seem to be made from heavy gradeplastic tube, painted black and have a small round convex mirror attached to the end. The overall length of these mirrors are approximately 6 inches long. These mirror although homemade look really great and are made of good quility materials. Abuddy who has a real set, cannot tell the difference between his 100 dollar set and mine....until you get up close.

I would keep these but I am unable to mount these to my F4 since the mounting holes already on my bike are covered with a steel bar (not going to drive a screw through that very easy). With these mirrorsthe base of the mounts do not come off so the screw would have to be inserted underneath side through the stock mounting holes (or if you chose new mounting holes) and into the base of the mirror. The good news is that the base on each of the mirrors is clean with no mounting holes so you can mount them on any bike with any size mounting hole you wish.

$20 and I will pay shipping. Pay Pal only.

Anyone???

those arent "homemade" you can get them from acertain non sponsor website or any website for that matter......

Yeah, but he made these.

What I consider "real" pig spotters are the ones that are made out of aluminum and then powder coated black. These pig spotters are by no means cheaply made but I do not want, at all, to have someone think they are getting the same pig spotters that cost $100 for only $20. All I am trying to do is not misled anyone. These mirrors are great but I did not know of anyway to describe them....homemade might be a bad use of words.

This fits any bike?

explain these mirrors...

The best I can explain them is these mirrors are approximately the same size and shape of the pig spotter mirrors you see on sale for $90 to $120. The two big differences between these is that my mirrors are not made of aluminum and powder coated...they are made of a heavy grade plastic material (think along the lines of a PVC pipe) and then painted black. Second, regular pig spotters are made one bike at a time (i.e. Honda this year to that). This is because the bases with theses mirrors are direct bolt on acc. so the mounting holes are predrilled. With my mirrors the bases are permanently affixed to the mirrors with a base that does not come predrilled. The base surface are is about 3.5 inch by 1.5 inch (oval). So if your mounting holes fall within this range then they should fit. Four screws come with it for install. They are your average run of the mill screws so you can use your own if you want.

As I stated above although, these are not the high dollar pig spotters, these are of really good quality and unless you are right on top of them you would be hard pressed to be able to tell a difference.

Any more questions let me know.

pm answered

if you still have them i will take them just pm me your paypal. thanks

ya but are these more eye pleasing or do they really work

all eye pleasing..you lose 40-60 percent visibility..

but come on fireplug iwant them!! if you have them. thanks

riding my friends bike with them.......they are really only good when you tuck behind the wind screen. But yeah mostly for eye appeal

If you send the money paypal tonight...I can ship them out tomorrow for you.

SOLD

do you have any more for sale