[sm=smiley1.gif]

i am in superior (just outside boulder)

I think we might be the only two from colorado on this forum? What kind of bike do you ride?

I am from Fort Collins. I just got my 2001 f4i.

mine is an 2003 600RR, you guys riding yet?
i think it might be time to put on the new rubber and take her out for a spin?

Yea I can't stay off the bike. It is too damn sexy to leave in the garage. I have gone through 3 tanks of gas so far. haha. Do you know of any tracks in colorado?

No not yet, started it the other day, but i still need a new clutch and tires, waitingon tires until i get my wheels powder coated.

Ahhh yea that would be nice to have...tires. Where do you usually ride? I can't wait to take this bike up to Aspen and Steamboat this summer.

I'm kind of a newbie, haven't ridin up I 70 yet, but plan to this year. There is a group of riders @ http://www.cosportbikeclub.org/that meet up every Saturday and Sunday to ride, you should check it out, maybe we can get together sometime this year and make that run to steamboat

Was in CO till about 6 months ago. Loved making the run to the top of lookout mountain over golden. I miss it already. There are a bunch of CO guys on here, but most people don't really look in this section.

Ahhh... well they should start! haha. Yea I only had a 200cc before this bike so riding in the mountains now should be awesome. I am excited to go anywhere with it.

Thanks for that link mccannf, I had found that and one more group (i have the link at home), also the only track I found is down by the springs I will post that link later as well.

Hopefully I will be up and running after this weekend. Air filter is coming in on Friday and should get new tires on Saturday. where are you getting your tires, I found a place in Denver affordablemotorcycletires.com they have low prices and $20 off bike install and balance, I still want to make sure I am getting the best deal. After this I am ready to go riding, my favorite is road is from Boulder to Estes thru the canyon :D

Your talking about the place off of 40th and Colorado right? That is the same place I'm getting my pilots, killer price! 108 front and 130 rear, 20 bucks mounted and balanced, best I've found so far.

ORIGINAL: mdfirefighter

Was in CO till about 6 months ago. Loved making the run to the top of lookout mountain over golden. I miss it already. There are a bunch of CO guys on here, but most people don't really look in this section.


I live like 5min from lookout mountain, It is much fun ;)

I live in Nebraska and want to take a ride into CO sometime this summer. Any good places I should try to hit up?

mccannf, that's the place. I ended up calling the guy up on Wednesday and they did not have any front tires in stock [:@] now I will have to wait another week :(

Triax, I will say pull up Google map, find the shortest way to the mountains and then look for the twistyest road going up and down. I also saw some tested paths on the site mccannf posted above

ORIGINAL: blackbears

mccannf, that's the place. I ended up calling the guy up on Wednesday and they did not have any front tires in stock [:@] now I will have to wait another week :(


What kind are you buying?

i got the M3's, i was going to go for the 2ct but decided i will save the cash and will get the 2ct's mid summer. i also took her out 3 times this week oh men... cant wait for the sand to clear up, a bit warmer will be nice too :D

how is Look Out mountain looking (in therms of sand on the road), depending on how St. Patty's goes i might go for a ride on sunday.

Haven't been out yet this year, still finishing up mods, if its not one problem its another, now I need brakes and rotors, so there goes another $450 Damn this is getting expensive [:@]

Haven't been out yet this year, still finishing up mods, if its not one problem its another, now I need brakes (http://www.cbrforum.com/m_234038/mpage_2/key_/tm.htm#) and rotors, so there goes another $450 Damn this is getting expensive [:@]


Haha I bet. Are you doing all the work yourself?

Yes, I can spent more money on better parts than throwing away money on labor, and that **** is really expensive! Tires just arrived, wheels should be back from powder coating by the end of the week, brakes should get ordered before the end of the week, i still need the brake side clip on ( i have a sticky throttle) and then reassemble everything, hopefully I can be riding by early April[sm=boohoo.gif]It sucks missing all these great days, but I know there will be more :D

I got my wheels back the other day and all I have to say is DAMNNNNNNNNNNN! they look freakin sweet! My new clip-ons are scheduled to be delivered Friday, still waiting on putting the funds together to order the brakes. I miss quoted them on my last post it is going to be more like $600 shipped. Thats for all new rotors (EBC pro-lite contours anyone using them?) and new pads. After i get those installed I can finally have my Piolot Powers mounted and balanced, install my RK quick accel chain and sprocket kit, and then I can finally take her out for spin [sm=icon_rock.gif]

Well you are making progress and with this weather you are not missing much. The freaking bastards poured a ton of sand on my street… so pissed [:@]. Post pics when you have the wheels on.

nice, yea the snow sucked but it is supposed to get nice again. I ordered a manual CCT off EBay and not I have to figure out how to put that damn thing in.

Just ordered my brakes, can't wait until I get them!

Whats upeveryone, just wanted to check in and see everyone was enjoying the weather and awesome riding we are having?

hey im ganna passing through denver on the i-70 heading west from kansas anyone know anygood spots to camp?

no, im going to aspen, leaving tonight from wichita...how are the roads there? looking forward to riding in some actualy twisties instead of the flatlands here!!

<--------another CO guy. Hows it goin?

hey everyone..im in Durango, CO anyone from this area on here?

I live in Northglenn. Would like to meet some people to ride with sometime. I have had my bike out a few times already but just for errands, nothing serious. I, too am also installing new parts as well. Tires, new chain and sprockets, brake rotors...

there is a group that is in colorado. check out www.cfrsr.com there is a ride coming up soon to steamboat

im moving to denver in may! :)

i cant believe that there arent more people from here on this forum. i live up in conifer, are you guys interested in going for a ride som ietime?

whats up everyone
i've been on here for a while just haven't checked out the local section till now. i would be in for a ride sometime
i work at OTD cyclesports, if anyone is interested we do free dyno runs. the best time to come down would be after 10 a.m. and 430-5 p.m weekdays and no later that 4 ish on saturdays our neighbors get pissed off if we are flogging bikes on the dyno at 9 in the morning. but yeah anyone can come down and check it out doesn't cost anything and let me know if any of you are gonna ride

yeah, colorado springs. just became a member today.