I have a pair of Ron Davis radiators that by their own admission seem to be the only ones they ever built for an f2/f3 .They were built in 95 and only the main was ever used ,and it raced for one season. The secondary lower radiator was built because it gets freaking hot here and never added because the bike was parked and my buddy got a girlfriend, etc. Anyway its been pressure tested and cleaned, not that it really needed it but its not a cheap piece so 65 bucks to check it out is worth it. Ron Davis estimates 1500 for the main, and 600 for the smaller to duplicate .They dont have the drawings and im looking into reproducing them if theres enough interest and get them afordable.Sorry for the long post but these arent off the shelf and deserve explanation for the 700.00 I am asking for them . Considering Ron Davis reputation , the fact that they have NASCAR , and other heavyweight customers, its still pretty cheap compared to what you get with brand new stock radiators . Id rather not separate them. The cores are 2inch and 1.5 inch respectively and my radiator guy says theres enough radiator in the main to cool a small car up to 1.8 liters, literally. I dont know what they weigh, but they are light .The main was built accomodate f3 air inlet .The secondary will have to have a mount worked in .The main is really clean and ive had trouble getting a good pic of its insides.The secondary has never been used.Anything else please ask me.
Marc



local://upfiles/12249/462260D9C4E24A8A8D1EB87AAB2F67E0.jpg