I'm looking into getting one for my bike but they all cost so much and have so many different styles. I just want to know what styles are out there and what you have and how much you paid for yours. I went to the local honda dealer and they have the universal ones that requires you to cut your mud guard and things like that so i'm not sure i want those kinds. I'm just curious in the styles avaliable for our bikes.

THanks!

http://home.comcast.net/~carlosg815/cbr6002.jpg

My buddy has the hotbodies kit on his red f4i and I gotta say it looks absolutely sic. I like how it has the seperated lights and it looks really clean under there, color matches the bike.

Need a cheap kit? Check out this eBay auction (http://cgi.ebay.com/ebaymotors/LOCKHART-PHILLIPS-TRICK-KIT-HONDA-CBR600-F4I-109-TK47_W0QQcmdZViewItemQQcategoryZ35580QQitemZ463741 4909QQrdZ1QQsspagenameZWDVW).

I recently put a Minus One fender eliminator on my 2001 cbr600 F4i. It's not super cheap, but it was a pretty good deal in my opinion once I compared some of the other stuff out there. With shipping and everything it was just under $100 (it was shipped priority mail and got there on a saturday!) I think it looks pretty good, considering those model years you have to relocate the lock and do some cutting. The instructions were pretty good and i'd recomend them. You can look at it HERE (http://bellsouthpwp.net/m/i/minus-1/productsa.htm). There's a few pics to look at.

my CW eliminator

local://upfiles/1144/9CF2FBACA9974D3CA36DE1CA61FEA276.jpg

did any of your kits require cutting of some sort? And how much did u pay for yours and where did you buy it at?

That Minus 1 kit looks really nice. How does it illuminate the license plate?

Yeah about that license plate, it doesn't illuminate it. I didn't have a tag light on my old bike either so i've been riding around here (North Carolina) for about two years with no problem. The tailight sitting above it lets some light go onto the plate at night, but that's about it. The kit also came with brackets to mount aftermarket turn signals, i just opted not to use it. I integrated my turn signals the cheaper way.

You can check my photo gallery for a peak at the eliminator I put on my F4i (there's a good picture from the back of the bike). I bought it off of eBay for around $100... but there was a lot of work to be done trying to force it into position - like some plastic/fiberglass parts for sale there, the manufacturing tolerances aren't the greatest. So just be careful what you're ordering.

Also, I didn't like the space provided for the license plate on the eliminator so as you might be able to see, I stuck some LED bolts in the spot where the plate should be. Gives a little more light back there and looks pretty cool. I used a swing arm/axle bracket to mount my license plate - no lights on the plate at all. Got pulled over in Wisconsin last summer cuz the cop couldn't see the plate, but once I pointed it out to him he let me go right away. He asked if it was legal in Michigan (where I live) and I said "Yea as long as it's visible they're OK with it." I was off and riding in no time.

Competition Werkes. $100 if I remember correctly.




local://upfiles/1578/4EA0865B2E2B4207A8322E506F5F5DBF.jpg

I bought mine from http://www.olsoncompositedesign.com/2004-2005-fender-eliminator-install.htm

This is the gallery link http://www.olsoncompositedesign.com/2004-2005-fender-eliminator-gallery.htm

This is not my bike
http://www.olsoncompositedesign.com/f4i%20300g.jpg

Hotbodies undertail - $179.00.

local://upfiles/4293/41DA00CDE2E743D885E68915E56D39A9.jpg

i have a comp. werks aswell. i really like the stock tail light.

http://img.photobucket.com/albums/v356/elisescivic1/13c10b6e.jpg

there is a picture of mine
i think it looks a little better painted so it matches the underside.

I have an 01 F4i and want to use the stock tail light but I hate the big blinkers sticking off the side of the bike. It there any way to just use the tail light and somehow have blinkers as well?? I know nothing about these undertails.

Thanks

http://photos-050.facebook.com/ip001/v12/19/98/2013452/n2013452_31425050_2579.jpg after i did the 03 conversion

i have a CW elim and CA led integrated light available from when i had the 05 rear

^^^^^^^^^^^^LED pegs

I just went with the Competition Werkes FE kit. It took me about 6 hours to install as I ended up having a problem with almost everything. The directions were very poor, and was nothing more than 2 photocopied pages 1 of which was all pictures. The pages had been copied so many times that it was hard to see the pictures clearly. Most of all, the kit is nothing more than a couple brackets and two pieces of flat metal. CW is making a killing of these things for the $130 retail price.

Hey any of you have a photo copy of the installations that show mesurements ? Think im gonna try making my own, doesnt seem that hard, just looking for some short cuts.. diagrams.

thanks

The instructions I got with the CW kit didn't have measurements. Just pictures with dotted lines showing where to cut on the sides. Nothing to show where to cut on the bottom, so I just took my best guess.

If I were to do it again, I'd go with the Minus 1 kit, posted above. It's the same thing as the CW kit without the slot for the license plate light. To illuminate the plate, I'd run the wires down the back of the plate and attach some small LED lights at the very bottom of the plate.

If you have an older model F4i, you may want to look at what this guy did:

Homemade FE kit (http://cbrworld.net/forums/thread/109887.aspx)

ORIGINAL: BrianAZ

The instructions I got with the CW kit didn't have measurements. Just pictures with dotted lines showing where to cut on the sides. Nothing to show where to cut on the bottom, so I just took my best guess.

If I were to do it again, I'd go with the Minus 1 kit, posted above. It's the same thing as the CW kit without the slot for the license plate light. To illuminate the plate, I'd run the wires down the back of the plate and attach some small LED lights at the very bottom of the plate.

If you have an older model F4i, you may want to look at what this guy did:

Homemade FE kit (http://cbrworld.net/forums/thread/109887.aspx)


Awesome, Thanks for that link!
Im going to give that a try, I'll post pics later. Thanks again

Mine's Mototeck. I installed a tag light from a Ford on mine that's hardly noticable.

local://upfiles/2733/8EA4ADC3F8174E129E706A418A38B495.jpg

http://i5.photobucket.com/albums/y199/turnin20s/e37a6642.jpg

Hotbodies Undertail, hotbodies hugger, and custom liscense plate mount. Yes I have gotten pulled over for where the plate is.

-Jesse-