:eek: Is there a way to have both head lights on in the low beam position??

i know it can be done but I would have to see how it is wired right now.

My RR has a screw behind the headlights on each side. Turning the screw adjusts the vertical height of the beam. I use both lights now with the main beam lowered so as not too blind everyone. Park the bike about 8 feet from a wall an start to adjust the beam, you'll see it going either up or down as you're doing it. Just bring it in line wth the other light.

You can but the headlights are possitioned differently, you would either have your brights on and it would look like dims or you would have your brights on and they would both be brights.

They would be positioned at the same angle so you either get all brights or all dims

Just adjust the high beams down...it works...

where is the adjustment screw located? I have a 05 1000rr

Any knows where to adjust beams in the F4i 2006 ?

Cheers

ORIGINAL: amadres

where is the adjustment screw located? I have a 05 1000rr



The screw is located at the top outer corner of the lights, looking at it from where you`d ride.

thanks

if you want to run both lights at low beam and then both at high, you need to convert to H4 bulbs.

Do they sell them at any Honda dealership??

h4 bulbs? no, you get those any auto parts place.
you gots to do some rewiring, etc...though.
let me know if you want the link and i'll PM it to you...it's in another forum.

I'll take that link. I know its here too just cant find it.

What's the link, I'd like to do the same thing.

Thanks,
JC

me too tahoe.....